Inspection Tags Decoded: What the Tag on Your Riser Actually Means

TAGS DECODED

By the Ironsmith Fire Engineering Team · Memphis, Nashville, Jacksonville AR, Orlando, Houston

A fire sprinkler inspection tag is a card hung on the riser or main control valve that records who last serviced the system, when, and what they found. NFPA 25 doesn’t set a national color code for these tags. States do. That’s why fire sprinkler inspection tag colors mean different things in Tennessee, Texas, Florida and Arkansas, and why a tag that looks fine in one state can mean trouble in another.

Quick facts

  • NFPA 25 doesn’t pick the colors. It offers a suggested color-coded program in an annex, but each state writes its own tag rules.
  • Red almost always means impaired. All four states we cover use a red tag when the system is out of service or can’t be counted on.
  • Texas uses four tags. White for service, light blue for inspections, yellow for deficiencies and red for emergency impairments.
  • Florida and Arkansas use green, yellow and red. Green means it passed. Yellow means problems. Red means critical problems or an impairment.
  • Tennessee keeps it simple. A service tag that can’t be red, plus a red tag for impairments. No green or yellow.
  • Owners can’t pull a red tag. In all four states, only the contractor’s authorized people or fire officials can remove it.

Why fire sprinkler inspection tag colors vary by state

Walk into a riser room in Houston, then one in Orlando, and you’ll see different colored cards hanging on the pipe. That’s not sloppiness. It’s state law.

NFPA 25 sets the inspection, testing and maintenance rules for sprinkler systems. What it doesn’t do is mandate a tag color scheme. It includes a suggested color-coded tagging program in an annex, and its committee has discussed a full tagging chapter for years without adding one, partly because state programs differ so much.

So the color, size and wording of your tag come from your state fire marshal’s rules. Here’s how it breaks down where we work.

Texas: white, light blue, yellow and red

Texas has the most detailed tag rules of the four, in the State Fire Marshal’s fire sprinkler rules.

  • White service tag. Goes on the riser after any service. It stays for five years.
  • Light blue ITM tag. Goes on the riser after a new installation or a scheduled inspection, test or maintenance visit. A new one is added each time and stays five years. It shows the inspection type (monthly through fifth year), whether the system is acceptable or has a yellow or red tag attached, the inspector’s license number and signature, the firm’s registration number, and the static and flowing main drain pressures.
  • Yellow tag. Used when a system doesn’t meet NFPA standards, isn’t being tested and maintained, or has recalled equipment, but isn’t an emergency impairment. It lists the problems. The owner and the local fire official get written notice within five business days.
  • Red tag. Used for an emergency impairment. The owner gets told right away, then in writing within 24 hours.

A yellow or red tag can only come off when a registered firm’s authorized employee or a government official removes it, and a service tag showing the fix has to go on first.

Some Texas cities add their own layer. Mesquite, for example, also uses a green tag.

Florida: green, yellow and red

Florida’s rule for fire protection contractors uses three colors on a tag hung at the main water control valve.

  • Green. The system is in compliance. The tag has to be plainly visible and no higher than 60 inches off the floor.
  • Yellow. Noncritical deficiencies. The owner gets the report within 30 days, and the fire official is notified if repairs aren’t contracted within 90 days.
  • Red. Critical deficiencies or an impairment. The owner hears within 24 hours. Fire officials get notified if critical deficiencies aren’t fixed within 30 days, or within 72 hours for impairments that aren’t fixed in that time.

Every Florida tag carries the contractor’s name and license number, the inspector’s permit number and signature, and a punched date. Only the contractor or the permitted inspector can remove it.

Tennessee: a service tag and a red tag

Tennessee’s rules for sprinkler contractors are shorter, and they surprise people.

  • Service tag. About 3 by 5 inches, and it can’t be red. It shows the contractor’s certificate number, the responsible managing employee’s license number, the date, the work performed, the two-inch drain test results and the owner. A new tag goes on with each visit.
  • Red tag. When the inspector finds an impairment, they notify the owner and the fire official and hang a red tag listing the impairments. No new service tag goes on until the system is fixed and reinspected.

That’s it. Tennessee doesn’t use green or yellow tags. If your Memphis or Nashville riser has a plain service tag, that’s normal. Only the contractor’s authorized employees or the State Fire Marshal’s representatives can take off a red tag.

Arkansas: green, yellow and red

Arkansas sprinkler rules come from the Fire Protection Licensing Board.

  • Green. The system passed inspection.
  • Yellow. An impairment, critical deficiency or noncritical deficiency. The report goes to the fire official within 14 business days.
  • Red. An emergency impairment. A laminated red tag also goes on the fire department connection, and the fire official or State Fire Marshal hears within 24 hours.

The four states side by side

TennesseeTexasFloridaArkansas
Passed or servicedService tag, any color but redWhite service tag, light blue ITM tagGreenGreen
DeficienciesListed on the reportYellowYellowYellow
ImpairedRedRedRedRed
Who can remove a red tagContractor or State Fire MarshalRegistered firm or government officialContractor or permitted inspectorLicensed contractor or fire officials

Rules change. If a tag on your riser doesn’t match this, ask your inspector or your state fire marshal’s office what applies today.

What to do about a yellow or red tag

A yellow tag means your system has problems that need fixing, but it still works. A red tag means it can’t be counted on. In both cases, the clock is running, and your fire official may already know.

Get the deficiency list from your inspector and get repairs scheduled. Our guide to what to do after a failed fire inspection walks through it. If you’re red tagged, the system is impaired, and you may need a fire watch. Here’s what fire watch requirements look like.

Better yet, don’t let a tag surprise you. Keep your inspection, testing and maintenance on schedule, and you’ll see problems on a report before they show up on the riser. Our NFPA 25 inspection crews tag to your state’s rules and walk you through what they found.

Can’t read the tag on your riser? We’ll tell you what it means and what’s next.

Schedule an inspection

Frequently asked questions

What do fire sprinkler inspection tag colors mean?

It depends on the state. Generally, green or a plain service tag means the system passed, yellow means it has deficiencies but still works, and red means it’s impaired or can’t be counted on. NFPA 25 doesn’t require a national color scheme, so state rules decide.

What does a red tag on a fire sprinkler system mean?

A red tag means the inspector found an impairment, so the system can’t be relied on to work as designed. In Tennessee, Texas, Florida and Arkansas, the owner and fire officials are notified, and only the contractor’s authorized people or fire officials can remove the tag.

Does Tennessee use yellow inspection tags?

No. Tennessee’s sprinkler contractor rules call for a service tag, which can’t be red, and a red tag for impairments. There’s no green or yellow tag in the state rule. Deficiencies are listed on the inspection report.

What color is a Texas fire sprinkler inspection tag?

Texas uses a light blue tag for inspection, testing and maintenance visits and a white tag for service work. A yellow tag marks deficiencies that aren’t emergencies, and a red tag marks an emergency impairment.

Can a building owner remove a fire sprinkler inspection tag?

No. In Tennessee, Texas, Florida and Arkansas, inspection and impairment tags can only be removed by the contractor’s authorized employees or by fire officials. In Texas, a service tag showing the repair has to go on before a yellow or red tag comes off.